Wiki source code of Huawei Remote Output Control
Last modified by Niels Tiben on 2023/10/17 07:46
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | See also: [[https:~~/~~/wiki.eniris.be/wiki/publicinformation/view/Integraties/IEC103%20Huawei/>>https://wiki.eniris.be/wiki/publicinformation/view/Integraties/IEC103%20Huawei/]] | ||
| 2 | |||
| 3 | |||
| 4 | |||
| 5 | 1. **Clock source**: Set **NTP**. | ||
| 6 | 1. **Server**: Set the server IP address or domain name. | ||
| 7 | 1. **NTP synchronization test**: Check the time synchronization status. | ||
| 8 | |||
| 9 | Set **Active power control mode** to **Remote output control**. | ||
| 10 | |||
| 11 | [[image:1.png]] | ||
| 12 | |||
| 13 | |||
| 14 | |||
| 15 | [[image:2.png]] | ||
| 16 | |||
| 17 | |||
| 18 | * **Control area**: Set the areas for remote output control. To enable the function in some areas, the license needs to be imported and enabled. | ||
| 19 | * **Output control duration**: Set the time required for the inverter to change its output power from 0% to 100% or from 100% to 0%. | ||
| 20 | * **PV plant ID**: Set the ID assigned by the power company to the SmartLogger. | ||
| 21 | * **Remote output control server**: Set to remotecontrol.eniris.be | ||
| 22 | * If the connection between the SmartLogger and the server is abnormal, obtain the output control file in **.data** format from the website of the power company and import the file. | ||
| 23 | * After the SmartLogger connects to the server, you can export the relevant file. | ||
| 24 | |||
| 25 | |||
| 26 |