Wiki source code of FTP Push for SMA
Version 2.1 by Bart Verheecke on 2024/10/24 08:31
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | = **Configuring FTP Push for EnnexOS** = | ||
| 2 | |||
| 3 | Note: You must be the owner of the installation to do this. | ||
| 4 | |||
| 5 | |||
| 6 | It may happen that the installation is registered in the older Sunny Portal portal, in which case a transfer must be made: | ||
| 7 | |||
| 8 | [[image:https://wiki.eniris.be/wiki/publicinformation/download/Integraties/EnnexOS/WebHome/1708723568452-982.png?rev=1.1||alt="1708723568452-982.png"]] | ||
| 9 | |||
| 10 | You must then choose: | ||
| 11 | |||
| 12 | [[image:https://wiki.eniris.be/wiki/publicinformation/download/Integraties/EnnexOS/WebHome/1708723583880-427.png?rev=1.1||alt="1708723583880-427.png"]] | ||
| 13 | |||
| 14 | [[image:https://wiki.eniris.be/wiki/publicinformation/download/Integraties/EnnexOS/WebHome/1708723591467-702.png?rev=1.1||alt="1708723591467-702.png"]] | ||
| 15 | |||
| 16 | 1. Log into the SMA Data Manager using the Admin User Name and Password. | ||
| 17 | 2. Select the EDMM (Data Manager) from the list of Devices. | ||
| 18 | 3. Navigate to the Configuration section (click on the "Gear" icon) and select the "External Communication" option. | ||
| 19 | 4. Under the "FTP Push" section, locate and select the "Carry out Initial Configuration" link. | ||
| 20 | 5. Check the "Enable FTP Push" box and enter in all the required information for the FTP server. | ||
| 21 | |||
| 22 | ftp server: ftp2.eniris.be | ||
| 23 | |||
| 24 | username: **ask via [[info@eniris.be>>mailto:info@eniris.be]]** | ||
| 25 | |||
| 26 | password**: ask via [[info@eniris.be>>mailto:info@eniris.be]]** | ||
| 27 | |||
| 28 | port: 21 | ||
| 29 | |||
| 30 | path: /files | ||
| 31 | |||
| 32 | push cycle: the most frequent | ||
| 33 | |||
| 34 | |||
| 35 | 6. Click on the "Check Connection" button to verify there is a good connection between the EDMM and FTP server. | ||
| 36 | 7. Click the "Save" button. | ||
| 37 | |||
| 38 | **Attention:** | ||
| 39 | |||
| 40 | Make sure the inverter names start with "INV". | ||
| 41 | |||
| 42 | [[image:https://wiki.eniris.be/wiki/publicinformation/download/Integraties/EnnexOS/WebHome/1708723602975-311.png?rev=1.1||alt="1708723602975-311.png"]] |